Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Tier1
TIER1-P5-20
20 X 2.5 Polypropylene Replacement Filter by Tier1 (5 micron)
$16.88
Fits most stand housings built for 20-inch x 2.5 inch filter cartridges
Ships fast!
Quick and easy installation and replacement
Provides great tasting, cleaner and fresher water
Goes to work reducing contaminants for up to six months
format_list_bulletedFeatures & Specs
Package Qty: 1
Manufacturer: Tier1
Manufacturer's Id: P5-20
UPC: 799932624940
Actual Size (in): 20 inches (length) x 2 3/8 inches (outside diameter)
Media: Spun Wound Polypropylene
Primary Filter Media: Polypropylene
Operating Temperature (°F): 40 - 125
Operating Temperature (°C): 4.4 - 51.7
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
Brand: Tier1
Advertised Size: 20 x 2-1/2
Depth (in): 2.38 in
Length (in): 20 in
Outside Diameter (in): 2.38 in
Width (cm): 6.03 in
Width (in): 2.38 in
Media Type: Sediment Filter
UPC's For Search: 799932624940 | 10051678016432 | 051678016435
Micron Rating Nominal: 5
Netsuite Item Type: Whole House Cartridges
descriptionInstructions
Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation
warning_amberContaminants
Dirt Sand Sediment
Rust And Corrosion
Sand
Sediment
Silt
filter_altFilter Life
Filter Life (gallons): 6 months
verified_userWarranty Info
Warranty Guarantee: Unconditional Product Guarantee for Life of the Product
TIER1-P5-20 Filter Advantages
The Pentek P5-20 comparable whole house sediment water filter by Tier1 is a 5 micron polypropylene filter that goes to work immediately reducing the contaminants that plague your drinking water. Contaminants reduced by this filter include dirt, particles, sand, sediment, and silt. The P5-20 by Tier fits most standard 20-inch x 2.5-inch housings, making it an ideal solution for numerous settings. With simple installation and replacement steps you can replace your existing cartridge as needed when ever you need. Order today!
Polypropylene Filter Cartridge
Polypropylene media inhibits bacterial growth making it an ideal option for both municipal and well water applications. These filters are effective at capturing contaminants such as sand, sediment, silt, and more. Unlike carbon filter cartridges you wont have to worry about small carbon fines potentially spilling into your water, while still enjoying the benefits of filtered water throughout your home. Polypropylene filters are great for whole house water filtration and can be used as effective pre-filters for whole house or point of use systems.
Standardized Filter Sizing
The 20 X 2.5 spun wound polypropylene replacement filter by Tier1 is built to fit 20-inch x 2.5-inch filter housings. This standard sizing allows this filter to easily replace existing styles of whole house filters for housings requiring 20 x 2.5 inch filters. The P5-20 goes to work immediately providing cleaner, fresher water for up to two months. Enjoy cleaner better water with your whole house replacement filter today.
TIER1-P5-20 is comparable with the following part number(s)