Tier1 10 inch x 2.5 inch String Wound Sediment Water Filter (20 Micron)

.price-ui--loading { display: block !important; opacity: 1 !important; }

$7.12

Ships fast!
Used in a variety of applications
Has a greater dirt holding capacity

format_list_bulleted Features & Specs

Package Qty: 1

Manufacturer: Tier1

Manufacturer's Id: TIER1-SWC-25-1020

UPC: 641945742305

Media: String Wound Polypropylene

Primary Filter Media: String-Wound Polypropylene

Warranty Guarantee: Unconditional Guarantee for Life of the Product

Brand: Tier1

Advertised Size: 10 x 2-1/2

Media Type: Sediment Filter

Micron Rating Nominal: 20

description Instructions

Turn off water supply. Press red pressure-relief button (if present)
Unscrew housing. Remove large o-ring, wipe clean and set aside
Discard used filter cartridge
Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly
Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly
Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove
NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove
Insert new filter cartridge
Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge
Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation

warning_amber Contaminants Reduced

Dirt Sand Sediment

Hard Scale

Rust And Corrosion

filter_alt Filter Life

Filter Life (gallons): 6 months

verified_user Warranty Info

Warranty Guarantee: Unconditional Guarantee for Life of the Product

Tier1 10 inch x 2.5 inch String Wound Sediment Water Filter (20 Micron)

Customer also purchased